The W10x17 is a W-shape structural steel profile identified by its standard designation. This reference provides the published profile dimensions, sectional area, unit weight, and related drafting resource in one place.
Use the dimensional data below when reviewing drawings, comparing steel shapes, or coordinating a preliminary layout. Final member selection and connection design require verification of loads, support conditions, material requirements, stability, and the governing project criteria.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 256.5 mm
Width : 101.9 mm
Web Thickness : 6.1 mm
Flange Thickness : 8.4 mm
Root Fillet Radius : 7.6 mm
Sectional Area : 32.19 cm2
Unit Weight : 25.3 kg/m
How to use the W10x17 reference
The listed depth, width, web thickness, flange thickness, and root fillet radius describe the geometric profile of the shape. The sectional area and unit weight are useful for reference, estimating, and coordination, but they do not by themselves establish the design capacity of a member.
The source identifies AISC 360-16, the AISC Specification for Structural Steel Buildings, as the referenced specification. Treat that reference as part of the technical context for the published data and confirm the applicable project edition, material specification, design method, and connection requirements before using the shape in engineering calculations.
Drafting and CAD reference
A DWG download is provided with this entry for CAD and detailing workflows. Before incorporating the file into a drawing, verify units, scale, layer settings, orientation, and the required level of fabrication or connection detail. The profile geometry should be coordinated with the project’s approved structural documents.
Related steel-shape topics
For broader reference work, compare this profile with other W-shapes, review steel section properties, and consult guidance on beam connections, column framing, and structural drawing conventions. These related topics help distinguish geometric reference data from the checks required for a complete design.
Frequently asked questions
What does W10x17 identify?
W10x17 is the standard designation used to identify this W-shape profile. The detailed dimensions and properties in the reference content should be used to confirm the actual geometry and mass information for drafting or review.
Can the listed properties be used as a complete design check?
No. Profile dimensions, sectional area, and unit weight are reference data. A complete design check also depends on loads, unbraced length, supports, material, limit states, connections, fire requirements, and applicable project criteria.
Why is AISC 360-16 mentioned?
The entry identifies AISC 360-16 as the referenced AISC specification for structural steel buildings. Confirm the governing requirements for the specific project before relying on any standard reference.
What is the DWG file used for?
The DWG file supports CAD and drafting workflows by providing a digital representation of the referenced shape. Check the drawing environment and coordinate the file with project-specific detailing requirements before use.
