Tag: steel connections
-
W-Shapes vs. HSS Under Torsion: Closed Sections, Warping, and Connection Effects
Compare how W-shapes and HSS resist torsion, including closed-section shear flow, warping, load position, connection behavior, and modeling checks.
Written by
-
Steel Beam Copes, Notches, and Blockouts: Geometry, Datums, and Detailing Checks
Learn how steel beam copes, notches, and blockouts differ, which dimensions control their geometry, and how to coordinate cuts with connections and fabrication.
Written by
-
Gross Area, Net Area, and Effective Net Area in Steel Tension Members
Learn how gross area, net area, and effective net area differ in steel tension members, including bolt holes, staggered paths, shear lag, and CAD checks.
Written by
-
Plate Washers at Slotted and Oversized Bolt Holes: Coverage, Movement, and Detailing Coordination
Learn how plate washers interact with slotted and oversized bolt holes, including hole coverage, movement direction, stack-up, welding, and drawing coordination.
Written by
-
Bearing Stiffeners in Steel Beams: Load Path, Fit, Pairing, and Detailing
A practical guide to steel beam bearing stiffeners, including load paths, plate fit, paired layouts, rolled-shape fillets, weld access, and drawing coordination.
Written by
-
Flush vs. Extended End-Plate Steel Connections: Geometry, Bolt Layout, and Detailing Coordination
Compare flush and extended end-plate steel connections, including plate geometry, bolt zones, member ends, welding, erection access, and drawing checks.
Written by
-
Reading Structural Steel Weld Symbols: Arrow Side, Other Side, and Joint Location
Learn how to read structural steel weld symbols, identify arrow-side and other-side welds, and coordinate joint location, extent, and shop drawings.
Written by
-
Slotted Bolt Holes for Structural Movement: Direction, Restraint, and Detailing Coordination
Learn how slot direction, bolt location, restraint, washers, and drawing notes affect slotted structural steel connections intended for movement.
Written by
-
Bolt Hole Edge Distance vs. Edge Clearance in Steel Detailing
Learn how bolt hole edge distance differs from clear material to a plate edge, how slots and skewed edges affect measurement, and how to check layouts in CAD.
Written by
-
Structural Bolt Projection Beyond the Nut: Stick-Out, Washer Stacks, and Clash Coordination
Learn how bolt stick-out, grip, washer stacks, thread location, and nearby steel affect structural bolted connection detailing and CAD coordination.
Written by
-
Weld Access Holes in Structural Steel: Purpose, Geometry, and Detailing Coordination
Learn how structural steel weld access holes differ from copes, what controls their geometry, and how to detail them clearly in shop drawings and CAD models.
Written by
-
HSS Knife-Plate Connections: Slot Geometry, Fit-Up, Welding, and Detailing
Learn how to detail HSS knife-plate connections, including slot geometry, plate alignment, weld access, bolt layout, tolerances, drainage, and CAD checks.
Written by
