Tag: steel connections
-
Block Shear Paths in Steel Connections: A Practical Guide to Plates, Angles, Tees, and Gussets
Learn how to identify block shear paths around bolt groups in steel plates, angles, tees, and gussets, including tension planes, shear planes, and CAD checks.
Written by
-
Single-Angle vs. Double-Angle Shear Connections: A Steel Detailing Comparison
Compare single-angle and double-angle shear connections, including orientation, framing geometry, bolts, welds, clearances, drawing views, and CAD checks.
Written by
-
Fillet Weld Size, Leg Length, and Throat: A Practical Steel Detailing Guide
Learn how fillet weld size, leg length, root, face, and throat relate—and how to show weld geometry clearly in structural steel drawings.
Written by
-
Structural Bolt Grip Length, Ply Thickness, and Thread Location: A Detailing Guide
Learn how ply thickness, washers, thread location, bolt length, and connection geometry affect structural bolt detailing and coordination.
Written by
-
Flange Gage in W-Shape Connections: Bolt Lines, Workable Gage, and Detailing Checks
Learn how flange gage controls bolt-line placement on W-shapes and how to check fillets, plate edges, tools, holes, and member substitutions.
Written by
-
Reading Structural Steel Plate Callouts: Thickness, Width, Length, and Orientation
Learn how to interpret structural steel plate callouts, dimension order, piece marks, plate orientation, holes, cuts, and drawing notes without relying on assumptions.
Written by
-
HSS End Conditions: Open Ends, Cap Plates, End Plates, and Drainage Coordination
Learn how to detail HSS open ends, cap plates, closure plates, end connections, vents, drains, welds, and member-length references.
Written by
-
HSS Weld Seam Orientation: What Drafters and Designers Need to Show
Learn how HSS weld seam orientation affects connections, openings, appearance, fabrication, inspection, and structural steel drawings.
Written by
-
Steel Shape Substitution Checklist: What to Recheck When a Member Size Changes
Use this steel shape substitution checklist to review section properties, connection fit, elevations, weight, fabrication details, and CAD revisions.
Written by
-
Bolt Hole Types in Structural Steel Detailing: Standard, Oversized, Short-Slot, and Long-Slot Holes
Learn how standard, oversized, short-slot, and long-slot bolt holes differ and how to represent hole geometry and orientation on steel drawings.
Written by
-
Wrench Clearance in Structural Steel Connections: Detailing for Bolt Installation and Tightening
Learn how to check wrench, socket, bolt insertion, and tightening access when detailing structural steel connections.
Written by
-
HSS Inside Dimensions: Clear Opening, Corner Radii, and Insert Fit
Learn why HSS inside dimensions cannot be determined reliably from outside size and wall thickness alone, especially when detailing inserts, plates, and connections.
Written by
