The W27x94 is a wide-flange structural steel shape listed in the supplied AISC 16 reference data. This page provides the reported geometric dimensions, sectional area, unit weight, and a DWG download for drafting workflows.
Use the source values as a shape-reference starting point, then confirm material specifications, loading, connection details, stability requirements, and project design criteria with the governing documents and a qualified structural engineer.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 683.3 mm
Width : 254 mm
Web Thickness : 12.4 mm
Flange Thickness : 18.9 mm
Root Fillet Radius : 15.1 mm
Sectional Area : 178.06 cm2
Unit Weight : 139.8 kg/m
How to read the W27x94 reference data
The listed depth and width describe the overall envelope of the W-shape. Web thickness identifies the thickness of the central web, while flange thickness identifies the thickness of the projecting flange material. These dimensions are useful when checking layout, framing clearances, connection geometry, and compatibility with adjacent construction.
The root fillet radius describes the curved transition between the web and flange. That transition can affect fit-up and detailing near the inside flange-to-web corner, so it should not be ignored when preparing connection sketches or checking clearances.
Section area and unit weight
Sectional area is a cross-sectional property used in calculations involving the steel shape. The listed unit weight supports material quantity estimates, framing takeoffs, and preliminary dead-load evaluation. Use the published source values directly and keep units consistent throughout calculations.
Drafting and related references
The supplied DWG file can support CAD-based layout and detailing. Before using it for fabrication or construction documents, verify scale, layer conventions, units, orientation, and the project-specific connection design. Related SteelSTD references on W-shapes, section properties, steel terminology, and connection detailing can help provide context without substituting for design verification.
W27x94 frequently asked questions
What type of shape is W27x94?
W27x94 is identified in the source as a W beam, also called a wide-flange structural steel shape.
What dimensions are listed for W27x94?
The source lists depth, width, web thickness, flange thickness, and root fillet radius. It also reports sectional area and unit weight.
Which reference is associated with this shape data?
The supplied content refers to AISC 16 and identifies the AISC Specification for Structural Steel Buildings, AISC 360-16, as the reference context.
Can the W27x94 DWG be used directly for fabrication?
The DWG is a drafting reference. Confirm its units and geometry against the project documents and approved engineering information before using it for fabrication or construction.
Is W27x94 automatically suitable for a structural application?
No. Shape selection depends on loading, span, restraint, connections, material specification, serviceability, stability, and other project requirements. A qualified engineer must verify the design.
