The W24x229 page provides a compact reference for a W beam, including its listed dimensions, sectional area, unit weight, and a downloadable DWG file. Use the source values as a starting point for steel detailing, drafting, estimating, and preliminary section comparisons.
The dimensional information is presented in millimeters, the sectional area in square centimeters, and the unit weight in kilograms per meter. For design work, confirm the applicable project requirements, material specification, connection assumptions, and governing engineering checks rather than relying on the shape designation alone.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 660.4 mm
Width : 332.7 mm
Web Thickness : 24.4 mm
Flange Thickness : 43.9 mm
Root Fillet Radius : 12.7 mm
Sectional Area : 433.55 cm2
Unit Weight : 340.3 kg/m
How to read the W24x229 reference
The listed depth and width describe the overall envelope of the section. Web thickness and flange thickness help describe the proportions of the rolled shape and are useful when coordinating details, clearances, stiffeners, copes, and connection components.
The root fillet radius identifies the curved transition between the web and flange. This feature matters when checking fit-up, detailing attachments near the flange-to-web intersection, or creating accurate CAD geometry. A drawing that ignores the fillet can show unrealistic contact or clearance conditions.
Sectional area and unit weight are reference properties with different uses. Area supports mass and material calculations, while unit weight is useful for estimating member handling loads and reviewing framing quantities. These values do not by themselves establish bending strength, axial resistance, stability, deflection performance, or connection capacity.
AISC context and drafting use
The source identifies AISC 360-16, the 2016 edition of the AISC Specification for Structural Steel Buildings, as the referenced specification context. Treat that reference as part of the page’s documentation context and verify the edition and project requirements before using the information for a design submission.
Use the linked DWG resource when developing drawings or coordination models, then check scale, units, insertion point, layer conventions, and the representation of the root fillet before incorporating the file into a project. Related resources on W-shape terminology, section properties, steel connections, and CAD detailing can help place this reference in a broader workflow.
W24x229 frequently asked questions
What type of section is W24x229?
W24x229 is identified in the source as a W beam. The page lists its overall dimensions, web and flange thicknesses, root fillet radius, sectional area, and unit weight.
Which specification context is listed for W24x229?
The source refers to AISC 360-16, the 2016 edition of the AISC Specification for Structural Steel Buildings. Project teams should confirm the governing requirements for their specific work.
Can the DWG file be used directly for fabrication?
The DWG is a drafting reference and should be reviewed before use. Confirm units, scale, geometry, detailing conventions, and project-specific fabrication requirements with the responsible design and detailing team.
Do the listed properties determine structural capacity?
No. The listed dimensions, sectional area, and unit weight are reference information. Structural capacity also depends on material, loading, boundary conditions, stability, design criteria, and connection behavior, which require engineering verification.
