The W24x192 is a wide-flange structural steel shape listed in the W-shape reference data below. This page brings the section geometry, sectional area, unit weight, design-standard context, and CAD resource together for engineers, detailers, fabricators, and students.
Use the published values as a dimensional reference, then verify material specifications, design assumptions, connection details, and project requirements before using the shape in engineering work. For related terminology, see the site’s reference on W-shapes and its guidance on structural steel section properties.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 647.7 mm
Width : 330.2 mm
Web Thickness : 20.6 mm
Flange Thickness : 37.1 mm
Root Fillet Radius : 12.7 mm
Sectional Area : 364.52 cm2
Unit Weight : 286.1 kg/m
W24x192 section reference
The source data identifies this member as a W beam and reports its overall depth, flange width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight. These values describe the physical section and are useful when coordinating framing layouts, checking clearances, preparing details, and comparing steel shapes.
Pay attention to the reported units when reading the table. Dimensions are given in millimeters, sectional area is given in square centimeters, and unit weight is given in kilograms per meter. Keeping these units consistent is important when transferring section data into calculations, schedules, estimating workflows, or modeling software.
How to use the published dimensions
Section dimensions can support preliminary layout and detailing, but they do not by themselves establish a member’s design capacity. Structural checks also depend on the applicable material, loads, boundary conditions, stability considerations, connections, fabrication requirements, and governing project criteria. Use the shape data together with the project’s design basis and a qualified engineering review.
Standard and CAD reference
The source references the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), identified as the 2016 edition. This page also provides a DWG download for the W24x192 profile. The CAD file can assist with drafting and coordination, but downloaded geometry should be checked against the authoritative section data before it is used for fabrication or issued drawings.
For additional workflow guidance, link this page to the site’s resources on steel detailing, DWG files, steel shape nomenclature, and structural steel connections.
W24x192 frequently asked questions
What type of section is W24x192?
W24x192 is identified in the source content as a W beam, also commonly described as a wide-flange structural steel shape.
What dimensions are provided for W24x192?
The reference data provides the section depth, width, web thickness, flange thickness, and root fillet radius, along with sectional area and unit weight. Refer to the source table for the authoritative values and units.
Which standard is referenced on this page?
The page references AISC 360-16, the American Institute of Steel Construction Specification for Structural Steel Buildings, identified in the source as the 2016 edition.
Is a DWG file available for W24x192?
Yes. The page includes a DWG download for the W24x192 profile. Confirm the downloaded geometry against the published section data before using it in an issued drawing or fabrication workflow.
Can the listed properties be used as a complete design check?
No. The listed geometry and section properties are reference data. Member design and connection design require project-specific engineering checks, applicable material information, loading, restraint conditions, and other governing requirements.
