The W24x162 is a W-shape steel beam reference presented with dimensional and section data from the listed AISC source. Use this page to review the section geometry, identify the available properties, and access the related DWG file for drafting workflows.
Because the designation is a catalog identifier, rely on the source-listed properties rather than estimating dimensions or weight from the name. For design work, confirm material, loading, connection conditions, stability, and applicable project requirements through the responsible engineer.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 635 mm
Width : 330.2 mm
Web Thickness : 17.9 mm
Flange Thickness : 31 mm
Root Fillet Radius : 12.7 mm
Sectional Area : 308.39 cm2
Unit Weight : 242.1 kg/m
How to read the W24x162 reference
The source content identifies this member as a W Beam and provides its depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight. These values describe the overall geometry and material distribution of the section; they should be kept together when comparing this shape with other W-shape references.
The sectional area is useful when reviewing the amount of steel in the cross-section, while unit weight supports material takeoff and coordination tasks. The listed flange, web, and fillet dimensions help distinguish the section geometry from the nominal designation. They are not a substitute for the complete section-property data required for an engineering check.
AISC reference and drafting resource
This page points to the AISC 16 reference identified in the source, including the AISC Specification for Structural Steel Buildings (AISC 360-16). Use the related W-shapes, steel section properties, and structural steel terminology resources for broader comparison and interpretation.
A DWG download is provided for the W24x162 shape. Review imported geometry, units, layer conventions, and project-specific drafting requirements before using the file in production documents. CAD geometry should be checked against the source data and should not be treated as a complete design deliverable.
W24x162 FAQ
What type of section is the W24x162?
It is identified in the source as a W Beam, a wide-flange structural steel shape reference.
Which properties are listed for the W24x162?
The source lists depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight. Refer to the original values on this page when checking or comparing the section.
Is a DWG file available for the W24x162?
Yes. The page includes a download reference for the W24x162 DWG file. Check the drawing units and geometry before incorporating it into project documentation.
Does the W24x162 reference replace engineering design?
No. The listed shape data supports reference and drafting tasks, but member selection and design require verification of the applicable loads, restraints, connections, materials, and project requirements.
