The W18x60 is a wide-flange structural steel shape identified by its nominal depth and weight designation. This reference provides the listed profile dimensions, sectional area, unit weight, and a DWG download for drafting workflows.
Use the dimensional data below as a section-reference resource, then verify design assumptions, material requirements, connection details, and applicable project criteria before using the shape in an engineered structure.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 462.3 mm
Width : 192 mm
Web Thickness : 10.5 mm
Flange Thickness : 17.7 mm
Root Fillet Radius : 10.3 mm
Sectional Area : 113.55 cm2
Unit Weight : 89.1 kg/m
How to read the W18x60 designation
In a W-shape designation, the letter W identifies a wide-flange beam. The remaining designation distinguishes the shape within the W-shape series. The profile dimensions in the source content describe the overall depth and width, web and flange thicknesses, and root fillet radius.
Profile dimensions and section data
The listed dimensions help users identify the shape in drawings, models, and steel-shape reference tools. Web thickness relates to the vertical portion of the section, while flange thickness describes the horizontal elements. The root fillet radius is important when interpreting the transition between web and flange and when coordinating details that fit against the shape.
The source also provides sectional area and unit weight. These values support quantity takeoffs, preliminary framing comparisons, and reference checks, but they do not by themselves establish allowable strength, stability, connection capacity, or a complete design.
AISC reference context
The page identifies AISC 360-16, the American Institute of Steel Construction specification for structural steel buildings. Treat that reference as design context rather than a substitute for project-specific engineering review. Material specification, limit states, load combinations, bracing, connections, fabrication, and erection requirements must be checked for the applicable project.
DWG resource for drafting
The downloadable DWG can help with CAD layout, detail coordination, and shape identification. Confirm the drawing unit system, layer conventions, insertion point, and any project drafting standards before incorporating the file into production documents.
Frequently asked questions
What does W18x60 mean?
It is a wide-flange steel shape designation. The source identifies the profile as a W beam and provides its associated dimensions and section data.
What information is listed for the W18x60?
The reference lists depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight.
Is the W18x60 suitable for a particular structural application?
Suitability depends on the complete structural design, including loads, span, restraint, stability, material requirements, connections, and applicable project criteria. A qualified engineer should verify the selection.
Where can I use the W18x60 DWG file?
The DWG is intended as a drafting and coordination resource. Review its units and geometry before using it in CAD or detailing software.
