The W18x97 is a W beam reference entry for checking published dimensions and basic section data. The existing specification block lists its depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight.
Use this page as a drafting and reference aid when reviewing W-shape dimensions, comparing section properties, or preparing details that require a compatible CAD/DWG resource. Confirm all design, connection, fabrication, and erection requirements against the applicable project documents and engineering checks.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 472.4 mm
Width : 281.9 mm
Web Thickness : 13.6 mm
Flange Thickness : 22.1 mm
Root Fillet Radius : 10.2 mm
Sectional Area : 183.87 cm2
Unit Weight : 144.3 kg/m
How to read the W18x97 reference
The source content identifies this member as a W beam and cites the AISC Specification for Structural Steel Buildings, AISC 360-16. The listed dimensions describe the overall shape and the thicknesses of its primary components.
Dimensions and section data
- Depth and width: These describe the overall envelope of the section and help with layout, clearance, and drawing coordination.
- Web thickness: This describes the thickness of the central web connecting the flanges.
- Flange thickness: This describes the thickness of the top and bottom flange elements.
- Root fillet radius: This identifies the rounded transition between the web and flange, which is important when coordinating contact surfaces and detailing.
- Sectional area and unit weight: These are reference properties used in material takeoffs, weight estimates, and engineering calculations. Apply the units shown in the source content.
Using the DWG resource
The downloadable DWG can support CAD coordination and preliminary detailing. Check the drawing against the authoritative dimensions on this page before using it in a production document, and account for connection, access, coating, fabrication, and project-specific requirements separately.
Related steel references
For broader study, connect this entry with resources covering steel terminology, section properties, steel connections, and structural steel design concepts.
W18x97 FAQ
What type of member is the W18x97?
The source identifies it as a W beam, commonly understood as a wide-flange structural steel shape.
Which standard is referenced on this page?
The reference block cites AISC 360-16, the AISC Specification for Structural Steel Buildings, as the governing source identified by the original content.
What information is provided for the W18x97?
The page lists depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight.
Can the DWG be used directly for final construction documents?
The DWG is a useful CAD reference, but it should be checked against the source dimensions and coordinated with project-specific engineering, connection, fabrication, and detailing requirements before final use.
Does this page replace structural design verification?
No. The listed values are reference data. Member selection, capacity checks, connections, stability, fabrication, and erection requirements require appropriate engineering review.
