The W14x53 is a W-shape reference for structural steel drafting, detailing, and preliminary section comparison. This page preserves the listed AISC 16 dimensions and section data, with terminology explained for easier use in design references and CAD workflows.
Use the dimensional information below alongside related W-shape terminology, common questions, and the available DWG download. Final member selection and connection design require project-specific engineering verification.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 353.1 mm
Width : 204.7 mm
Web Thickness : 9.4 mm
Flange Thickness : 16.8 mm
Root Fillet Radius : 15 mm
Sectional Area : 100.64 cm2
Unit Weight : 79 kg/m
How to read the W14x53 reference
The designation identifies a W-shape, while the listed properties describe its overall geometry and material quantity. The depth and width describe the principal outside dimensions of the section. These values are useful when checking framing layouts, clearances, and drafting details.
Web thickness refers to the thickness of the central web, and flange thickness refers to the thickness of the projecting top and bottom elements. The root fillet radius describes the curved transition between the web and flange. That transition is important when considering fit-up, detailing, and how dimensions are interpreted around the inside corners of the shape.
Sectional area represents the steel area of the cross-section. Unit weight expresses the listed mass per unit length and can support material takeoffs and weight comparisons. These properties should be read together with the governing project criteria rather than treated as a complete structural design check.
Using the AISC and CAD references
The source identifies AISC 16 and the AISC Specification for Structural Steel Buildings (AISC 360-16) as the reference context. The specification provides requirements related to the design, fabrication, and erection of steel structures in the United States. For broader comparison, see related references for W-shapes, steel section properties, and steel connections and detailing.
The linked DWG file can support drafting workflows where a CAD representation of the W14x53 is needed. Confirm drawing units, layer conventions, insertion settings, and project-specific detailing requirements before incorporating the file into production documents.
Frequently asked questions
What type of section is the W14x53?
It is a W-shape, commonly referenced as a structural steel wide-flange section. The page provides its listed geometry, sectional area, and unit weight.
What does the W14x53 designation mean?
The designation is the section mark used for this W-shape. The source content identifies the section as W14x53; use the accompanying dimensions and properties as the controlling local reference for this page.
Which standard is referenced?
The source refers to AISC 16, specifically the AISC 360-16 specification and its 2016 edition context.
Can the listed values be used for final member design?
The values are useful reference data, but final design also depends on loading, unbraced conditions, connection details, material requirements, applicable project criteria, and engineering checks.
Is a CAD file available?
Yes. The page includes a link to a DWG file named W14x53.dwg for use as a drafting reference. Review the file before integrating it into project documentation.
