The W10x22 is a W-shaped structural steel section identified by its published profile dimensions and mass per unit length. This reference page keeps the local AISC-based values together with practical guidance for reading the section data and using the accompanying CAD resource.
Use this page when checking a steel shape schedule, reviewing a framing detail, or coordinating a drawing with a section-properties reference. For related information, see the site’s references on W-shape dimensions, steel section properties, and structural steel connections.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 259.1 mm
Width : 146 mm
Web Thickness : 6.1 mm
Flange Thickness : 9.1 mm
Root Fillet Radius : 7.6 mm
Sectional Area : 41.87 cm2
Unit Weight : 32.9 kg/m
How to read the W10x22 reference
The listed depth and width describe the overall envelope of the rolled section. The web thickness applies to the central web, while the flange thickness describes the projecting flange material. Together, these dimensions help engineers and detailers coordinate the shape with framing layouts, clearances, and connection geometry.
The root fillet radius identifies the curved transition between the web and flange. This region matters when detailing plates, angles, clips, weld access, and other components that meet the rolled profile. Actual fit-up and connection design should account for the shape geometry rather than treating the section as a perfectly sharp-cornered rectangle.
Section data and practical use
Sectional area is a geometric property of the steel profile and is commonly used with material density when determining mass. The listed unit weight expresses the section’s mass per unit length, making it useful for estimating member loads, handling requirements, shipping quantities, and preliminary material takeoffs.
The source identifies the AISC Specification for Structural Steel Buildings, AISC 360-16, as the governing reference associated with this entry. This page is a dimensional and terminology reference; member selection, strength checks, stability checks, connection design, fabrication, and erection requirements still require project-specific engineering review.
CAD and detailing workflow
Use the downloadable W10x22 DWG with the section data when preparing plans, elevations, connection details, or coordination drawings. Confirm drawing units, scale, orientation, and project drafting conventions before incorporating the file into a design set. Related internal references on DWG steel shapes, beam detailing, and steel connection terminology can help support the drafting workflow.
W10x22 frequently asked questions
What is the W10x22?
W10x22 is the catalog designation for a W-shaped structural steel section. The accompanying reference data provides its profile dimensions, sectional area, and unit weight.
What do the web and flange dimensions describe?
The web dimension describes the thickness of the central portion of the shape, while the flange dimension describes the thickness of the upper and lower projecting portions. These values are useful for layout and detailing, but connection components must also account for the root fillet.
What is the purpose of the root fillet radius?
The root fillet radius describes the curved transition where the web meets a flange. It helps detailers avoid assuming a sharp inside corner when checking fit, plate contact, weld access, or clearances.
Can the W10x22 page be used for final member selection?
No. The page is a reference for section identification and published geometry. Final selection requires project-specific checks for loads, span, support conditions, stability, serviceability, connections, material requirements, and applicable design provisions.
Is a CAD file available for the W10x22?
Yes. The source content includes a downloadable DWG resource for the W10x22. Review the file’s units and drawing conventions before using it in project documentation.
