The W33x152 is a W-shape steel beam reference entry with dimensional and material-quantity information presented from the site’s AISC-based source data. Use the values below when reviewing section geometry, preparing drawings, or comparing this shape with other W-shape references.
This page is intended as a practical reference for engineers, detailers, fabricators, and students. The listed properties should be read together with the applicable project specifications, material requirements, connection details, and engineering checks.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 850.9 mm
Width : 294.6 mm
Web Thickness : 16.1 mm
Flange Thickness : 26.9 mm
Root Fillet Radius : 17.8 mm
Sectional Area : 289.68 cm2
Unit Weight : 227.4 kg/m
How to read the W33x152 reference data
The source data identifies the overall depth and width of the section, followed by web thickness, flange thickness, and root fillet radius. These dimensions describe the basic rolled profile and are useful when checking clearances, detailing framing intersections, and coordinating the section with connection components.
Sectional area describes the amount of steel contained in the cross-section. The listed unit weight expresses the mass of the member per unit length, which is commonly used for material takeoffs, shipping estimates, and preliminary framing coordination. These values do not replace project-specific design checks or fabrication requirements.
Using this page with related steel references
- Compare the W33x152 with other W-shape dimensions when evaluating framing alternatives.
- Review related steel section properties before beginning strength, stability, or serviceability calculations.
- Coordinate the section with steel connections and detailing, including fit-up, access, and available clearance.
- Use the linked DWG resource as a drafting aid, then verify the drawing against the project design documents and fabrication requirements.
Design and drafting considerations
A shape designation and tabulated dimensions identify the reference section, but they do not by themselves establish whether the member is adequate for a particular span, load case, connection, or limit state. Confirm the governing design specification, material information, load effects, restraints, and connection design before using the section in construction documents.
Frequently asked questions
What does W33x152 identify?
W33x152 is the designation used for this W-shape beam reference. The page provides its listed geometry, sectional area, unit weight, and related DWG resource.
What information is included for this section?
The reference includes overall depth and width, web and flange thickness, root fillet radius, sectional area, and unit weight. The source also identifies the AISC 360-16 reference context.
Can the DWG file be used directly for fabrication?
The DWG should be treated as a drafting and coordination resource. Confirm dimensions, tolerances, material requirements, connections, and project-specific fabrication information before issuing construction or fabrication documents.
Does the listed unit weight determine design adequacy?
No. Unit weight supports material takeoffs and coordination, but member adequacy requires project-specific structural checks and engineering review.
