The W30x326 is a wide-flange structural steel shape listed in the AISC 16 reference data. This page provides the source dimensions, sectional area, unit weight, and a CAD download link for engineering reference and drafting workflows.
Use the published values as a starting point for identifying the section. Before selecting or specifying the shape, verify the applicable material specification, design assumptions, connection details, fabrication requirements, and project criteria with the responsible engineer.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 823 mm
Width : 391.2 mm
Web Thickness : 29 mm
Flange Thickness : 52.1 mm
Root Fillet Radius : 20.1 mm
Sectional Area : 618.71 cm2
Unit Weight : 485.7 kg/m
How to read the W30x326 reference
The W designation identifies a wide-flange shape. The complete designation, W30x326, is a catalog identifier and should be used together with the dimensional data shown in the source content rather than as a replacement for it. Actual depth, flange width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight are separate reference properties.
Important section properties
Depth and width describe the overall envelope of the shape. Web thickness relates to the central vertical element, while flange thickness describes the horizontal elements. The root fillet radius identifies the transition between the web and flanges and can matter when checking detailing, clearances, and connection geometry.
Sectional area is used in calculations such as mass and axial-property evaluation, while unit weight supports estimating, handling, shipping, and material takeoff work. These properties do not by themselves establish bending strength, buckling resistance, connection capacity, or suitability for a particular structural application.
AISC reference and DWG workflow
The source identifies AISC 360-16 as the governing reference for the listed AISC 16 shape data. Designers and detailers should confirm that the project uses the intended reference edition and should coordinate the section data with the project specification and issued design documents.
The available DWG file can support CAD layout and preliminary detailing. After importing the drawing, check units, layer conventions, orientation, scale, and connection clearances before using it in production documents. Related resources may include W-shape dimensions, steel section properties, AISC shape references, and structural steel connection detailing.
W30x326 FAQ
What type of section is W30x326?
W30x326 is a W, or wide-flange, structural steel section. The designation identifies the cataloged shape; the source dimensions provide the physical section data.
Where are the W30x326 dimensions listed?
The dimensions and section properties are listed in the source content on this page, including overall dimensions, web and flange thicknesses, root fillet radius, sectional area, and unit weight.
What is the W30x326 DWG file used for?
The DWG file is intended as a CAD reference for layout and drafting. Review its units, scale, orientation, and project-specific detailing requirements before incorporating it into deliverables.
Does the W30x326 reference confirm structural capacity?
No. Dimensions and section properties alone do not confirm capacity. Structural design also depends on material, span, loads, restraint, limit states, connections, applicable specifications, and engineering review.
Which reference is identified for this shape data?
The source identifies the AISC Specification for Structural Steel Buildings, AISC 360-16, as the reference associated with the listed data.
