W18x192

W18x192 is a W-shaped structural steel section identified by its nominal depth-and-weight designation. This reference page provides the section geometry and unit weight listed in the accompanying AISC-based data, along with a CAD download for drafting and reference work.

Use the dimensional information below to identify the section and coordinate drawings. Section selection, strength checks, connection design, stability, and detailing should be verified using the applicable project requirements and by a qualified engineer.

W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 518.2 mm
Width : 292.1 mm
Web Thickness : 24.4 mm
Flange Thickness : 44.4 mm
Root Fillet Radius : 10.2 mm
Sectional Area : 362.58 cm²
Unit Weight : 284.6 kg/m

How to read the W18x192 designation

The W identifies a wide-flange beam, commonly used as a structural steel member. The designation distinguishes this section from other W shapes and helps engineers, fabricators, detailers, and specifiers select the intended profile from a steel shape database or drawing set.

Understanding the listed section data

The source data identifies the section’s overall depth, flange width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight. These properties describe the physical profile and are useful when coordinating framing layouts, checking clearances, preparing connection details, and estimating member mass.

Section geometry should not be confused with design resistance. A complete design review may also require the material specification, member length, support conditions, bracing, loading, connection behavior, applicable limit states, and project-specific design criteria. The values on this page should therefore be used together with the governing design documents rather than as a standalone design approval.

AISC reference context

The source refers to AISC 360-16, the 2016 edition of the AISC Specification for Structural Steel Buildings. That specification provides requirements relevant to the design, fabrication, and erection of steel structures in the United States. For related research, consider linking this page to the site’s guides on W-shape terminology, steel section properties, beam design concepts, and steel connection detailing.

DWG download and drafting use

The downloadable DWG can support CAD coordination, shop-drawing preparation, and layout work. Confirm the drawing unit system, layer conventions, section orientation, and project drafting standards before incorporating the file into a production drawing. A CAD profile represents geometry; it does not by itself establish material grade, design capacity, fabrication tolerances, or connection requirements.

W18x192 FAQ

What is a W18x192?

W18x192 is a wide-flange structural steel beam designation. The source identifies it as a W beam and provides its physical dimensions, sectional area, and unit weight.

What information is provided for this section?

The reference lists the section depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight. These values are intended for section identification and technical reference.

Does the W18x192 data determine whether the beam is adequate?

No. Adequacy depends on the project loads, span, supports, bracing, material, connections, applicable limit states, and governing design requirements. An engineer should complete the design verification.

What is the DWG file used for?

The DWG provides a CAD representation of the section for drafting and coordination. Review its units and project compatibility before using it in design or fabrication documents.