The W12x210 is a wide-flange structural steel shape listed in the site’s W-shape reference series. This page provides the source dimensions, sectional area, unit weight, and related CAD access in a compact format for engineers, detailers, fabricators, and students.
Use the listed values as a reference when comparing W-shapes, reviewing steel terminology, or coordinating drawings. For design work, confirm the applicable material specification, loading assumptions, connection requirements, and project criteria before relying on any section data.
W Beam
refer to : AISC 16
the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16), which is the 2016 edition of the AISC Specification for Structural Steel Buildings. It provides guidelines and requirements for the design, fabrication, and erection of steel structures in the United States.
Depth : 373.4 mm
Width : 325.1 mm
Web Thickness : 30 mm
Flange Thickness : 48.3 mm
Root Fillet Radius : 15.2 mm
Sectional Area : 398.71 cm2
Unit Weight : 313 kg/m
How to use this W12x210 reference
The existing reference block reports the shape’s overall dimensions, web and flange thicknesses, root fillet radius, sectional area, and unit weight. Keep the units shown with each property when transferring values into calculations, schedules, estimating documents, or detailing software.
Dimensions describe the physical profile, while sectional area and unit weight support different stages of engineering and drafting work. These values should not be treated as a substitute for a complete design check or for connection-specific information. Review the governing project requirements and verify assumptions with the responsible engineer.
Standards and related resources
The source identifies AISC 16 as the relevant AISC reference context. Readers can use this page alongside related references on W-shapes, steel section properties, steel connections, and structural steel terminology when comparing sections or preparing design documentation.
DWG access for detailing
A DWG download is provided with the source content for users who need a drawing reference. Before incorporating the file into a project, check units, layer conventions, drawing scale, and the required level of detailing in the active CAD environment.
W12x210 FAQ
What information is listed for the W12x210?
The reference lists depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight.
Which standard context is identified on this page?
The source identifies AISC 16 and describes it as the AISC Specification for Structural Steel Buildings, including design, fabrication, and erection requirements.
Can the listed values be used directly for final structural design?
No. They are reference data for the listed shape. Final design also requires project-specific loads, material requirements, stability checks, connection design, applicable specifications, and engineering verification.
Is a CAD file available?
Yes. The source includes a DWG download for the W12x210 reference shape. Review the file within the project’s CAD and drawing-control procedures before use.
Why should units be checked before using the data?
The page combines dimensional, area, and weight units. Confirm unit consistency before entering the values into calculations, schedules, estimating tools, or modeling software.
