The UB 914x305x224 is a Universal Beam profile identified by its nominal designation and documented with dimensional and sectional-property data. This reference page brings together the source dimensions, mass information, standard reference, and CAD download for engineers, detailers, fabricators, and steel estimators.
Use the values in the technical listing as the controlling local reference. Before using this section in a design, connection, fabrication, or procurement decision, confirm the required material specification, design actions, restraint conditions, corrosion allowances, and project requirements with the responsible engineer.
UB 914x305x224
Universal Beams
refer to : EN 10365:2017
a European standard that defines the dimensions, tolerances, and sectional properties for hot-rolled steel channels, I-beams, and H-beams used in construction and engineering. It ensures uniformity and compatibility across European structural steel products.
Dimension : 910.4×304.1×15.9×23.9
Depth : 910.4 mm
Width : 304.1 mm
Web Thickness : 15.9 mm
Flange Thickness : 23.9 mm
Root Fillet Radius : 19 mm
Sectional Area : 285.6 cm2
Unit Weight : 224.2 kg/m
How to read the UB 914x305x224 reference
The listed dimensions describe the principal geometry of the beam: overall depth, flange width, web thickness, and flange thickness. The root fillet radius identifies the transition between the web and flange, which is important when checking detailing clearances, connection interfaces, and fabrication drawings.
The sectional area is a geometric property used in calculations such as axial resistance and mass estimation. The listed unit weight expresses the beam’s mass per unit length and can support takeoff, handling, shipping, and preliminary framing estimates. These properties should not be treated as a substitute for a complete design check.
Standard and drafting reference
The source identifies EN 10365:2017 as the dimensional and sectional-property reference for this Universal Beam profile. Consult the applicable project documentation and current governing requirements when verifying tolerances, material grade, fabrication, and acceptance criteria.
A DWG download is provided with this entry for drafting and coordination workflows. Check the drawing units, insertion scale, layer conventions, and project-specific detailing requirements before incorporating the file into production documentation.
Related steel reference topics
- Universal Beam and other structural steel section designations
- Steel section properties and how engineers use them
- Beam connection and detailing terminology
- CAD and DWG resources for structural steel drafting
Frequently asked questions
What does UB 914x305x224 mean?
It is the designation for a Universal Beam profile. The source listing provides its measured depth, width, web thickness, flange thickness, root fillet radius, sectional area, and unit weight.
Which standard is referenced for this beam?
The entry refers to EN 10365:2017 for the dimensional and sectional-property reference associated with the profile.
Can the listed unit weight be used for a final quantity takeoff?
It can support preliminary estimation, but final quantities should account for the project specification, cut lengths, connection components, fabrication allowances, coatings, and any other items required by the estimating scope.
Is a CAD file available?
Yes. The page includes a DWG download for the UB 914x305x224 reference. Verify scale and units before using it in a design or fabrication drawing.
Does the profile data alone confirm structural capacity?
No. Capacity depends on the material specification, loading, span, restraint, buckling behavior, connection details, design method, and governing project requirements. A qualified engineer should complete the design verification.
