The UB 762x267x220 is a Universal Beam reference for structural steel design, drafting, and product identification. This page brings together the listed dimensions, section data, applicable standard reference, and a CAD download link in one place.
Use the source values when checking a drawing, comparing steel schedules, or preparing a connection detail. For related terminology, see the site’s guides to Universal Beams, section properties, and steel connection detailing.
UB 762x267x220
Universal Beams
refer to : EN 10365:2017
a European standard that defines the dimensions, tolerances, and sectional properties for hot-rolled steel channels, I-beams, and H-beams used in construction and engineering. It ensures uniformity and compatibility across European structural steel products.
Dimension : 779x266x16.5×30
Depth : 779 mm
Width : 266 mm
Web Thickness : 16.5 mm
Flange Thickness : 30 mm
Root Fillet Radius : 17 mm
Sectional Area : 280.7 cm2
Unit Weight : 220.3 kg/m
How to read the UB 762x267x220 reference
The designation identifies a Universal Beam section within the UB range. The detailed source entry should be used in preference to the designation alone when setting out geometry, checking clearances, or coordinating fabrication information.
Listed dimensions and section data
The reference gives a detailed dimension of 779x266x16.5×30. These values correspond to the listed depth, width, web thickness, and flange thickness. The source also identifies a root fillet radius of 17 mm, which is important when reviewing contact surfaces, connection plates, copes, and CAD geometry near the web-to-flange junction.
The listed sectional area is 280.7 cm2, and the unit weight is 220.3 kg/m. Sectional area and unit weight serve different reference purposes: area supports section-property and material-quantity checks, while unit weight supports approximate member weight and handling coordination. Final design checks should use the governing project specification and the engineer’s verified calculations.
Standard and CAD reference
The entry refers to EN 10365:2017, which provides a standardized basis for dimensions, tolerances, and sectional properties of hot-rolled structural steel sections. The linked DWG file can support drafting and coordination, but CAD geometry should be checked against the authoritative project data before fabrication or construction use.
Practical review checklist
- Confirm that the selected UB designation matches the member schedule and design documentation.
- Compare the detailed dimensions with the section geometry required by the drawing or connection detail.
- Allow for the root fillet when detailing plates, stiffeners, copes, and clearance zones.
- Use the listed unit weight for reference coordination, with project-specific verification for final quantities.
- Check the downloaded DWG against the source dimensions before issuing drawings.
Frequently asked questions
What is the UB 762x267x220?
It is a Universal Beam section reference with the listed detailed dimensions of 779x266x16.5×30 and a listed unit weight of 220.3 kg/m.
Which standard is referenced for this section?
The source entry refers to EN 10365:2017. The standard reference is provided for the dimensions, tolerances, and sectional-property framework associated with the section.
What are the main dimensions of this UB section?
The listed depth is 779 mm, width is 266 mm, web thickness is 16.5 mm, and flange thickness is 30 mm. The listed root fillet radius is 17 mm.
Is a DWG file available?
Yes. The page includes a DWG download link for UB 762x267x220. Review the CAD geometry against the source values before using it for detailed design or fabrication documentation.
Can the listed unit weight be used for final design?
The listed unit weight is a useful reference for coordination and quantity checks. Final structural design, member selection, and fabrication decisions require verification against the project requirements and the responsible engineer’s calculations.
