Tag: structural steel detailing
-
Near-Side vs. Far-Side Steel Detailing: Reading Plates, Holes, and Bolts in Elevation
Learn how near-side and far-side steel components are shown in elevations, sections, and CAD details without mirroring connection geometry.
Written by
-
Flange Gage in W-Shape Connections: Bolt Lines, Workable Gage, and Detailing Checks
Learn how flange gage controls bolt-line placement on W-shapes and how to check fillets, plate edges, tools, holes, and member substitutions.
Written by
-
Structural Steel Beam Web Openings: Coordination, Reinforcement, and Detailing
A practical guide to structural steel beam web openings, including terminology, load-path effects, reinforcement concepts, MEP coordination, and CAD detailing.
Written by
-
Beam-to-Column Flange vs. Beam-to-Column Web Connections: A Detailing Comparison
Compare beam-to-column flange and web connections, including orientation, access, load paths, connection space, and CAD detailing checks.
Written by
-
Local Axes in Structural Steel CAD Models: Member Direction, Section Rotation, and Coordination
Learn how structural steel local axes control member direction, section rotation, offsets, connection orientation, and reliable CAD model coordination.
Written by
-
Shop vs. Field Connections in Structural Steel Drawings: Bolts, Welds, and Coordination
Learn how shop and field steel connections affect drawings, bolts, welds, piece marks, erection sequencing, and coordination between fabricator and erector.
Written by
-
Structural Steel Piece Marks: A Practical Guide to Part, Assembly, and Erection Identification
Learn how structural steel piece marks identify parts and assemblies across shop drawings, bills of material, CAD models, fabrication, and erection.
Written by
-
HSS End Conditions: Open Ends, Cap Plates, End Plates, and Drainage Coordination
Learn how to detail HSS open ends, cap plates, closure plates, end connections, vents, drains, welds, and member-length references.
Written by
-
Reading Structural Steel Plate Callouts: Thickness, Width, Length, and Orientation
Learn how to interpret structural steel plate callouts, dimension order, piece marks, plate orientation, holes, cuts, and drawing notes without relying on assumptions.
Written by
-
Steel Beam Bearing Length, Seat Length, and End Clearance: A Detailing Guide
Learn how steel beam bearing length differs from seat length and end clearance, and how to coordinate these dimensions in structural drawings and CAD models.
Written by
-
Steel Column Splice Detailing: Elevations, Alignment, and Drawing Coordination
A practical guide to steel column splice detailing, including splice elevations, member alignment, orientation, plate geometry, erection needs, and drawing coordination.
Written by
-
Camber vs. Sweep in Structural Steel Members: Geometry, Measurement, and Detailing
Learn how camber, sweep, slope, and out-of-straightness differ in structural steel, including measurement references and practical CAD detailing guidance.
Written by
