Tag: shop drawings
-
Steel Beam Copes, Notches, and Blockouts: Geometry, Datums, and Detailing Checks
Learn how steel beam copes, notches, and blockouts differ, which dimensions control their geometry, and how to coordinate cuts with connections and fabrication.
Written by
-
Faying Surfaces in Bolted Steel Connections: Contact Planes, Coatings, and Detailing Coordination
Learn how faying surfaces affect bolted steel connections, including contact-plane identification, coatings, masking, preparation notes, and drawing coordination.
Written by
-
Steel Column Cap Plates: Load Path, Bearing, Datums, and Detailing Coordination
A practical guide to steel column cap plate detailing, including load paths, bearing geometry, elevations, weld access, holes, and shop drawing checks.
Written by
-
Framing Steel Beams into HSS Columns: Face Datums, Connection Zones, and Detailing Coordination
A practical guide to beam-to-HSS-column detailing, including face datums, connection types, wall geometry, weld access, tolerances, and CAD checks.
Written by
-
Multi-Ply Bolt Hole Alignment in Steel Connections: Datums, Stack-Up, and Drawing Coordination
Learn how common datums, ply stack-up, member orientation, and CAD checks help prevent misaligned bolt holes in structural steel connections.
Written by
-
Bearing Stiffeners in Steel Beams: Load Path, Fit, Pairing, and Detailing
A practical guide to steel beam bearing stiffeners, including load paths, plate fit, paired layouts, rolled-shape fillets, weld access, and drawing coordination.
Written by
-
Vent and Drain Holes in Galvanized HSS: Orientation, Internal Paths, and Drawing Coordination
Learn how HSS vent and drain holes relate to galvanizing orientation, internal plates, connection details, appearance, fabrication, and drawing coordination.
Written by
-
Reading Structural Steel Weld Symbols: Arrow Side, Other Side, and Joint Location
Learn how to read structural steel weld symbols, identify arrow-side and other-side welds, and coordinate joint location, extent, and shop drawings.
Written by
-
Continuity Plates in Steel Moment Connections: Alignment, Fit, and Detailing Coordination
Learn how continuity plates align with beam flanges, fit around column fillets, interact with doubler plates, and affect welding and shop detailing.
Written by
-
Structural Steel Revision Control: Coordinating Models, Shop Drawings, BOMs, and CNC Data
A practical guide to controlling structural steel revisions across CAD models, shop drawings, piece marks, bills of material, and fabrication data.
Written by
-
Slotted Bolt Holes for Structural Movement: Direction, Restraint, and Detailing Coordination
Learn how slot direction, bolt location, restraint, washers, and drawing notes affect slotted structural steel connections intended for movement.
Written by
-
Bolt Hole Edge Distance vs. Edge Clearance in Steel Detailing
Learn how bolt hole edge distance differs from clear material to a plate edge, how slots and skewed edges affect measurement, and how to check layouts in CAD.
Written by
