The Celsius 355 CHS 48.3×3.2 is a circular hollow section reference entry for checking the listed outside diameter, wall thickness, sectional area, and unit weight. Use the values below as a focused dimensional reference when reviewing structural steel layouts, connection details, or CAD models.
For broader context, compare this entry with related circular hollow section dimensions, section properties, and steel terminology references on SteelSTD. Always confirm the governing project specification and design assumptions before using a section in engineering work.
Celsius 355 CHS 48.3×3.2
Celsius 355 Circular Hollow Sections
refer to : EN 10210-2:2006-04
the European standard that specifies tolerances, dimensions, and sectional properties for hot-finished structural hollow sections of non-alloy and fine grain steels. It supports EN 10210-1, which covers technical delivery conditions.
Diameter : 48.3 mm
Thickness : 3.2 mm
Sectional Area : 4.53 cm2
Unit Weight : 3.6 kg/m
How to read this CHS reference
CHS means circular hollow section. The designation identifies a round, hollow steel profile, while the size notation indicates the listed diameter and wall thickness. In this entry, the diameter is 48.3 mm and the thickness is 3.2 mm.
The sectional area is the cross-sectional steel area reported for the profile. The unit weight expresses the listed mass per metre and can support material takeoffs and drafting coordination. These values should be used together with the applicable design checks rather than as a substitute for member, connection, or stability verification.
Standard reference
This entry refers to EN 10210-2:2006-04, which addresses dimensions, tolerances, and sectional properties for hot-finished structural hollow sections. It supports the associated technical delivery requirements identified in the source content. Review the applicable project documents and adopted standard requirements before fabrication or design approval.
CAD and drafting resource
The downloadable DWG provides a practical starting point for drawings and layout work. Check the imported geometry, units, layer conventions, and drawing scale against the project template before issuing or manufacturing from a CAD file. Related resources may include DWG steel sections, structural detailing, and hollow section connections.
Frequently asked questions
What does CHS mean?
CHS means circular hollow section, a round hollow structural steel profile.
What are the listed dimensions for this section?
The source lists a diameter of 48.3 mm and a thickness of 3.2 mm.
What sectional properties are provided?
The entry provides a sectional area of 4.53 cm2 and a unit weight of 3.6 kg/m.
Which standard is referenced?
The entry refers to EN 10210-2:2006-04 for the dimensional, tolerance, and sectional-property reference described in the source.
Is the DWG ready for direct fabrication?
The DWG is a drafting reference. Verify its geometry, units, project requirements, and engineering design before using it for fabrication or issued-for-construction documentation.
