The UC 254x254x167 is a Universal Column reference for structural steel detailing and design documentation. This page brings together the section designation, the listed profile dimensions, key section data, and a downloadable DWG resource.
Use the technical values below as the controlling local reference for this section. For broader context, compare this profile with the site’s Universal Columns guide, steel section properties resources, and practical connection and detailing references.
UC 254x254x167
Universal Columns
refer to : EN 10365:2017
a European standard that defines the dimensions, tolerances, and sectional properties for hot-rolled steel channels, I-beams, and H-beams used in construction and engineering. It ensures uniformity and compatibility across European structural steel products.
Dimension : 289.1×265.2×19.2×31.7
Depth : 289.1 mm
Width : 265.2 mm
Web Thickness : 19.2 mm
Flange Thickness : 31.7 mm
Root Fillet Radius : 13 mm
Sectional Area : 212.9 cm2
Unit Weight : 167.1 kg/m
How to read the UC 254x254x167 reference
The designation identifies the Universal Column series and its nominal size and mass class. The separate dimension entry provides the profile dimensions used to understand the actual cross-section. These labels should not be treated as substitutes for the detailed values listed in the source content.
Dimensions and section properties
For drafting and checking, review the listed depth, width, web thickness, flange thickness, and root fillet radius together. These dimensions describe the overall profile and the geometry of its web-to-flange transition. The sectional area and unit weight provide complementary reference data: area describes the amount of steel in the cross-section, while unit weight describes mass per unit length.
When preparing drawings, allow the root region and flange geometry to remain consistent with the referenced section. Connection plates, bolts, welds, copes, openings, and clearances should be developed from the project design and verified against the applicable engineering requirements rather than inferred from the designation alone.
Standard and CAD reference
The source identifies EN 10365:2017 as the dimensional and sectional-property reference for this profile. The linked DWG can support CAD workflows such as layout, coordination, and preliminary detailing. Confirm scale, units, layer conventions, and project-specific drafting requirements before incorporating the file into issued drawings.
For related work, see the site’s resources on structural steel terminology, section-property interpretation, steel connections, and DWG reference files. These topics help connect the tabulated profile data with practical detailing decisions without replacing project-specific design verification.
Frequently asked questions
What is the UC 254x254x167?
It is a Universal Column section reference with the dimensions, sectional area, and unit weight listed in the source content.
Which standard is referenced for this UC section?
The page refers to EN 10365:2017 for the dimensions, tolerances, and sectional properties of the relevant hot-rolled structural steel sections.
What is the difference between the section designation and the dimension entry?
The designation is the commonly used section name, while the dimension entry records the profile dimensions used for technical reference. Always use the listed dimensions when checking geometry.
Can the DWG file be used directly for structural design?
The DWG is a CAD reference for drafting and coordination. Structural design, connection detailing, fabrication allowances, and project compliance still require review by the responsible engineer or detailer.
