The UB 533x210x92 is a Universal Beam reference for checking section dimensions, terminology, and the listed mass and area data before design or drafting work. This page keeps the authoritative values together and explains how to read them.
Use the profile information alongside your project specification, connection details, material requirements, and design checks. The accompanying DWG file can support preliminary detailing and coordination, but drawings and calculations should be reviewed against the applicable project requirements.
UB 533x210x92
Universal Beams
refer to : EN 10365:2017
a European standard that defines the dimensions, tolerances, and sectional properties for hot-rolled steel channels, I-beams, and H-beams used in construction and engineering. It ensures uniformity and compatibility across European structural steel products.
Dimension : 533.1×209.3×10.1×15.6
Depth : 533.1 mm
Width : 209.3 mm
Web Thickness : 10.1 mm
Flange Thickness : 15.6 mm
Root Fillet Radius : 13 mm
Sectional Area : 117.4 cm2
Unit Weight : 92.2 kg/m
How to read the UB 533x210x92 reference
The listed dimension string presents the overall depth and width followed by the web and flange thicknesses. In the source data, these are identified as depth, width, web thickness, and flange thickness, respectively. The root fillet radius describes the transition between the web and flange, which is important when interpreting clearances, connection detailing, and CAD geometry.
Section data and design context
The sectional area and unit weight are reference properties for estimating steel quantity and understanding the section record. They should not be treated as a substitute for the section properties, material grade, load combinations, buckling checks, or connection design required for a project.
For structural terminology, review the related concepts of Universal Beams, sectional properties, steel connections, and fabrication detailing. These topics help connect the tabulated profile data with analysis models, member schedules, fabrication drawings, and quantity takeoffs.
Standard and CAD reference
The source identifies EN 10365:2017 as the reference for the dimensional and sectional-property framework used for this European rolled-section entry. The linked DWG is useful for drafting and coordination; confirm units, layer conventions, tolerances, and project-specific detailing requirements before using it in a released drawing.
Frequently asked questions
What does UB mean?
UB means Universal Beam, a rolled structural steel section designation used for beam profiles with flanges and a connecting web.
What do the four values in the dimension field represent?
For this entry, the values are presented as overall depth, overall width, web thickness, and flange thickness. The page also lists the root fillet radius separately.
What is the listed unit weight used for?
The unit weight is a reference value for estimating member mass and steel quantities. Final quantities should account for the actual member length, fittings, plates, connections, and fabrication requirements.
Can the DWG be used directly for fabrication?
The DWG can assist with drafting and coordination, but it should be checked against the project specification, required tolerances, connection design, fabrication practice, and the controlling technical documentation before release.
Does this page replace structural design verification?
No. The listed dimensions and reference properties support identification and preliminary work. A qualified engineer must verify strength, stability, serviceability, connections, and the suitability of the member for its intended application.
