RHS 110x60x4 is a cold-formed welded rectangular hollow section with a 110 mm depth, 60 mm width, and 4 mm wall thickness. This reference brings together the published dimensional data, corner radii, sectional area, unit weight, applicable standard context, and a CAD download for drafting workflows.
Use the dimensional information below when identifying the section in drawings, schedules, connection details, and preliminary steelwork documentation. For related terminology, see the site’s references on rectangular hollow sections, sectional properties, and steel connection detailing.
RHS 110x60x4
Cold Formed Welded Rectangular Steel Tubes
refer to : EN 10219-2
the European standard that specifies tolerances, dimensions, and sectional properties for cold-formed welded structural hollow sections made of non-alloy and fine grain steels. It complements EN 10219-1, which covers technical delivery conditions.
Dimension : 110x60x4
Depth : 110 mm
Width : 60 mm
Thickness : 4 mm
Outer Corner Radius : 8 mm
Inner Corner Radius : 4 mm
Sectional Area : 12.55 cm2
Unit Weight : 9.9 kg/m
Understanding the RHS 110x60x4 designation
The designation identifies a rectangular hollow section by its outside depth, outside width, and nominal wall thickness. For this section, those dimensions are 110 mm, 60 mm, and 4 mm respectively. The hollow profile provides a closed shape that is commonly represented in structural drawings, fabrication documents, and CAD libraries.
Dimensions and corner geometry
The listed outer and inner corner radii describe how the flat faces transition around the tube corners. These radii are important when interpreting the section outline, preparing fabrication details, or checking how a connection component bears against the profile. They should not be confused with the nominal outside dimensions or wall thickness.
Sectional data for reference
The source data reports the sectional area and unit weight for this RHS. Sectional area is used as a cross-sectional descriptor, while unit weight supports material takeoffs and estimating. Design checks require the appropriate sectional properties, material specification, load effects, connection assumptions, and applicable design rules; the listed reference data alone does not establish member capacity.
Standard and CAD reference
The page identifies EN 10219-2 for tolerances, dimensions, and sectional properties associated with cold-formed welded structural hollow sections, with EN 10219-1 covering technical delivery conditions. Consult the linked standard references and project specifications when confirming ordering, fabrication, or compliance requirements.
The available DWG file can support drawing coordination and layout work. Before issuing fabrication or construction documents, verify the profile orientation, units, corner representation, and project-specific requirements in the CAD environment.
FAQ
What does RHS 110x60x4 mean?
It identifies a rectangular hollow section with a nominal outside depth of 110 mm, outside width of 60 mm, and wall thickness of 4 mm.
Which standard is referenced for this section?
The source references EN 10219-2 for tolerances, dimensions, and sectional properties, and notes the relationship with EN 10219-1 for technical delivery conditions.
What are the corner radii of RHS 110x60x4?
The listed outer corner radius is 8 mm and the listed inner corner radius is 4 mm.
Can the listed sectional area and unit weight be used for design?
They are useful reference values, but member and connection design also depends on the material specification, loading, restraint, limit states, and governing design requirements. Confirm the complete design basis with the responsible engineer.
Is a CAD file available?
Yes. The page includes a DWG download for the RHS 110x60x4 profile. Check units and geometry before incorporating it into project documentation.
