The UB 533x210x82 is a Universal Beam reference with the nominal mass designation shown in its name. This page brings together the listed dimensions, sectional area, unit weight, standard reference, and CAD download so engineers, detailers, and students can review the section consistently.
Use the dimensional data below when checking drawings, comparing steel sections, or coordinating a beam designation with a structural steel schedule. The listed values are the authoritative local reference for this page.
UB 533x210x82
Universal Beams
refer to : EN 10365:2017
a European standard that defines the dimensions, tolerances, and sectional properties for hot-rolled steel channels, I-beams, and H-beams used in construction and engineering. It ensures uniformity and compatibility across European structural steel products.
Dimension : 528.3×208.8×9.6×13.2
Depth : 528.3 mm
Width : 208.8 mm
Web Thickness : 9.6 mm
Flange Thickness : 13.2 mm
Root Fillet Radius : 13 mm
Sectional Area : 104.7 cm2
Unit Weight : 82.2 kg/m
How to read the UB 533x210x82 designation
“UB” identifies the Universal Beam section family. The remaining designation is used to distinguish this beam reference within the UB range and is associated with the listed unit weight. The detailed dimensions on this page should be used instead of interpreting the designation as a complete substitute for section geometry.
What the listed dimensions mean
- Depth: the overall vertical dimension of the section.
- Width: the overall flange width.
- Web thickness: the thickness of the central web connecting the flanges.
- Flange thickness: the thickness of each flange region.
- Root fillet radius: the curved transition between the web and flange, which is important when modeling interfaces and detailing connections.
The dimension string is presented as depth, width, web thickness, and flange thickness. The source also lists the sectional area and unit weight, which are useful for material takeoff, mass estimates, and cross-checking a steel schedule. They do not, by themselves, replace the section properties and design checks required for a particular member application.
Standard and CAD reference
The page references EN 10365:2017, which provides a common basis for dimensions, tolerances, and sectional properties for hot-rolled steel sections. For drafting workflows, the linked DWG file can support preliminary layout and detailing. Confirm the drawing units, insertion scale, section orientation, and project-specific requirements before using CAD geometry in issued documents.
For related research, compare this entry with other Universal Beam dimensions, review guidance on structural steel terminology, and consult resources covering steel connections and detailing. These internal reference topics help connect section selection with practical drawing and design coordination.
Frequently asked questions
What does UB mean?
UB means Universal Beam, a structural steel section family with a web between two flanges.
What dimensions are listed for the UB 533x210x82?
The source lists the depth, width, web thickness, flange thickness, and root fillet radius. It also provides the sectional area and unit weight.
Which standard is referenced?
This page references EN 10365:2017 for the dimensional and sectional reference of the steel shape.
Is the listed unit weight the same as the designation?
The designation identifies the section reference, while the page separately reports the unit weight. The listed unit weight should be used for the local reference data on this page.
Can I use the DWG file directly for fabrication?
The DWG is a drafting reference. Check its scale, units, geometry, and project requirements before using it for fabrication or issued construction documentation. Engineering verification is still required for member and connection design.
