RHS 150x100x6 is a cold-formed welded rectangular hollow steel section reference for engineers, detailers, fabricators, and CAD users. This page identifies the section dimensions and selected reference properties while retaining the authoritative local data below.
Use the dimensional information together with the applicable product standard and project requirements. For related terminology, see the site’s references on rectangular hollow sections, steel section properties, and structural steel connections.
RHS 150x100x6
Cold Formed Welded Rectangular Steel Tubes
refer to : EN 10219-2
the European standard that specifies tolerances, dimensions, and sectional properties for cold-formed welded structural hollow sections made of non-alloy and fine grain steels. It complements EN 10219-1, which covers technical delivery conditions.
Dimension : 150x100x6
Depth : 150 mm
Width : 100 mm
Thickness : 6 mm
Outer Corner Radius : 12 mm
Inner Corner Radius : 6 mm
Sectional Area : 27.63 cm2
Unit Weight : 21.7 kg/m
RHS 150x100x6 reference
The designation describes a rectangular hollow section with a depth of 150 mm, a width of 100 mm, and a wall thickness of 6 mm. The listed outer and inner corner radii describe the formed corners and are relevant when interpreting drawings, detailing connections, or comparing section data.
Standard reference
The source refers to EN 10219-2 for tolerances, dimensions, and sectional properties of cold-formed welded structural hollow sections. It also identifies EN 10219-1 as the related standard covering technical delivery conditions. Consult the applicable project specification and current standard documentation before using the section in fabrication or design work.
Quick reference
- Section: RHS 150x100x6
- Depth: 150 mm
- Width: 100 mm
- Thickness: 6 mm
- Outer corner radius: 12 mm
- Inner corner radius: 6 mm
- Sectional area: 27.63 cm2
- Unit weight: 21.7 kg/m
Using the CAD reference
The downloadable DWG can support drafting and coordination workflows. Verify units, layer conventions, section orientation, and project-specific detailing requirements before incorporating the file into production drawings. Related internal resources may include the DWG library, steel shape terminology guide, and hollow-section detailing guide.
Frequently asked questions
What does RHS 150x100x6 mean?
It identifies a rectangular hollow steel section with a 150 mm depth, 100 mm width, and 6 mm wall thickness.
Which standard is referenced for this section?
The source references EN 10219-2 for tolerances, dimensions, and sectional properties, and identifies EN 10219-1 as covering technical delivery conditions.
What are the listed corner radii?
The listed outer corner radius is 12 mm and the inner corner radius is 6 mm. These values describe the formed corner geometry of the section.
Where can I find the RHS 150x100x6 drawing?
The page provides a DWG download for the RHS 150x100x6 reference. Check the file and project drafting requirements before using it in construction documentation.
Can the listed values be used directly for structural design?
The values are reference data from the source content. Structural design and fabrication decisions require verification against the applicable standards, material specification, loading, connection details, and project requirements.
