The Hybox 355 SHS 60x60x4 is a square hollow section reference for checking basic geometry, section data, and drafting information. This page brings the listed dimensions, corner radii, sectional area, and unit weight together with the cited European standard context.
Use the data below alongside related resources on structural steel shapes, section properties, and steel connections and detailing. The downloadable DWG can support CAD coordination, while engineering design decisions should be verified against the applicable project requirements.
Hybox 355 SHS 60x60x4
Hybox 355 Square Hollow Sections
refer to : EN 10219-2:2006-04
the European standard that specifies tolerances, dimensions, and sectional properties for cold-formed welded structural hollow sections made of non-alloy and fine grain steels. It complements EN 10219-1, which covers technical delivery conditions.
Dimension : 60x60x4
Depth : 60 mm
Width : 60 mm
Thickness : 4 mm
Outer Corner Radius : 8 mm
Inner Corner Radius : 4 mm
Sectional Area : 8.55 cm2
Unit Weight : 6.7 kg/m
How to read the Hybox 355 SHS data
The designation identifies a square hollow section with equal outside depth and width and a stated wall thickness. The listed outer and inner corner radii describe the curved transitions at the corners rather than sharp theoretical corners.
The sectional area is useful when reviewing section-property information, material quantity, or weight calculations. The unit weight provides a reference for estimating the member’s mass per metre. These values should be used consistently with the section definition and the governing project specification.
Standard reference and CAD resource
The source cites EN 10219-2:2006-04 for tolerances, dimensions, and sectional properties of cold-formed welded structural hollow sections made from non-alloy and fine grain steels. It also identifies EN 10219-1 as covering technical delivery conditions. Confirm the required material documentation and specification before using the section in a project.
The associated DWG download is intended as a drafting reference for the Hybox 355 SHS 60x60x4 profile. Check units, scale, layer conventions, and project-specific detailing requirements before incorporating the drawing into production documentation.
Frequently asked questions
What are the nominal dimensions of Hybox 355 SHS 60x60x4?
The listed dimension is 60x60x4, with a depth of 60 mm, a width of 60 mm, and a thickness of 4 mm.
What are the corner radii for this square hollow section?
The listed outer corner radius is 8 mm, and the listed inner corner radius is 4 mm.
What is the sectional area?
The listed sectional area is 8.55 cm2. Use the value with the applicable section-property and design assumptions for the project.
What is the unit weight?
The listed unit weight is 6.7 kg/m. This can support preliminary material takeoffs, subject to confirmation against the approved product and project documentation.
Which standard is referenced?
The page cites EN 10219-2:2006-04 for the relevant dimensions, tolerances, and sectional properties, and identifies EN 10219-1 for technical delivery conditions.
Is a DWG file available?
Yes. The page includes a DWG download for the Hybox 355 SHS 60x60x4 profile. Review the file’s units and drafting conventions before use.
