Hybox 355 SHS 100x100x6 is a square hollow section reference for checking the listed dimensions, corner radii, sectional area, and unit weight of this structural steel profile.
Use the dimensional data below as the local reference for this page, then review the related EN 10219-2 terminology and the downloadable DWG file when preparing drawings or comparing section information. Design use, connection detailing, and member verification should be checked against the applicable project requirements.
Hybox 355 SHS 100x100x6
Hybox 355 Square Hollow Sections
refer to : EN 10219-2:2006-04
the European standard that specifies tolerances, dimensions, and sectional properties for cold-formed welded structural hollow sections made of non-alloy and fine grain steels. It complements EN 10219-1, which covers technical delivery conditions.
Dimension : 100x100x6
Depth : 100 mm
Width : 100 mm
Thickness : 6 mm
Outer Corner Radius : 12 mm
Inner Corner Radius : 6 mm
Sectional Area : 21.6 cm2
Unit Weight : 17 kg/m
How to read this SHS reference
An SHS, or square hollow section, is identified here by equal outside depth and width. The designation 100x100x6 communicates the listed section size and wall thickness; the source content also provides the outer and inner corner radii for more detailed drafting and section interpretation.
Key reference data
- Section dimensions: depth, width, and thickness are listed individually so the designation can be checked against the source values.
- Corner geometry: outer and inner corner radii describe the rounded transitions between the flat faces of the hollow section.
- Sectional area: the listed area is useful when reviewing section-property information and material quantity calculations.
- Unit weight: the listed mass per unit length supports estimating and comparing steel member quantities.
Standard and drawing reference
The page refers to EN 10219-2:2006-04 for tolerances, dimensions, and sectional properties of cold-formed welded structural hollow sections made from non-alloy and fine grain steels. The source also notes the relationship with EN 10219-1, which covers technical delivery conditions.
For drafting workflows, download the available DWG file after confirming that the geometry and project specification match the intended section. Related topics such as structural steel section properties, hollow section connections, and steel detailing can provide useful context for design review.
Frequently asked questions
What does SHS mean?
SHS means square hollow section. In this reference, the section has equal listed depth and width, with a hollow interior and rounded corners.
What does 100x100x6 identify?
It is the section designation shown on this page. The source separately lists the depth, width, and thickness so each part of the designation can be verified.
Why are corner radii included?
Corner radii describe the rounded geometry at the section corners. They are relevant when interpreting the profile shape, preparing drawings, or comparing section data.
Which standard is referenced?
The source refers to EN 10219-2:2006-04 for tolerances, dimensions, and sectional properties, and notes that EN 10219-1 covers technical delivery conditions.
Is a DWG file available?
Yes. The page includes a downloadable DWG reference for Hybox 355 SHS 100x100x6. Confirm the drawing against the project specification before using it for detailing.
